Contents

 
 Starrsed FAQ Section
Collapse General FAQ section
   Collapse ESR FAQ
      Expand Dilution FAQ
      Expand Aspiration, vacuum and liquid flow FAQ index
      Collapse Measurement and results FAQ
          High rate of hazy sample rates (FAQ)
          Reported result is over 140 mm
          Measure head goes down only halfway (FAQ)
          Poor results from the measure head sensor (FAQ)
          Result is send to the LIMS, despite of a leaking pipette
          0mm/hr no cells or no plasma
          Most results are reported with "Bubbles on top" (FAQ)
          Measure sensor position error (FAQ)
          Is it possible to export results to Excel ?
          What effect have Limit error settings on sending results to LIMS ?
          What means L_err (--- 84 75 200) in the result field?
   Expand Cleaning and drying
    Carousel moves three position steps (FAQ)
   Expand Quality control
   Expand Software and hardware FAQ
   Expand Reagents
   Expand Error lists
    Extended Error explanation (Starrsed Software)
Expand Instrument specific FAQ
Expand Knowledge base
 Index