Symptom :

Reported result is > 140 mm and no Error 2 is reported

Hint :

This is only possible with a very high measurement after 30 minutes. This result will be calculated to a 60-minute result and reported as a > 140 mm result.

Additional information:

Example:
If in the 30-minute method 118 mm is measured, the calculated result will be 143 mm. This will not be reported as "Error 2". E2 will only be reported when there is >140 mm measured. and not when there is >140 mm result calculated

Applicable for:

Interrliner
Starrsed RS
Starrsed ST
Starrsed TL
Starrsed Compact