Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Measure head goes down only halfway (FAQ)

Symptom :

Measure head goes down only halfway

Hint :

  1. Check temperature circuit board position at the right-handed pillar, the board can be found at the rear of this pillar.
    • There is a possibility that the sensor vane catches the temperature circuit board.

Additional information :

 

Applicable for:

Interrliner
Starrsed RS
Starrsed TL
Starrsed Compact

FAQ 30012

See Also

Measurement and results FAQ

High rate of hazy sample rates (FAQ)

Reported result is over 140 mm

Poor results from the measure head sensor (FAQ)

Result is send to the LIMS, despite of a leaking pipette

0mm/hr no cells or no plasma

Most results are reported with "Bubbles on top" (FAQ)

Measure sensor position error (FAQ)

Is it possible to export results to Excel ?

What effect have Limit error settings on sending results to LIMS ?

What means L_err (--- 84 75 200) in the result field?

To top of page Mechatronics home Send Feedback Print