L_err(--- 84 75 200) is a warning that a limit error is triggered by one of the limit error settings and no result is reported. Description of the error message L_err(hhh/www/ttt/ccc) :
- L_err means it is a "limit error"
- hhh is the 30 minutes ESR
- www is the 60 minute ESR
- ttt is the temperature corrected 60 minute result
- ccc is the column height
Example of a limit error message:
- L_err( 42/ 84/ 75/200) means 42 mm in the 30 minute method and temperature correction 75 with a correct column height.
- L_err(---/ 84/ 75/200) means 84 mm in the 60 minute method and temperature correction 75 with a correct column height.
|