Symptom :
Poor results from the measure head sensor
Hint :
Usually caused by dirty measure sensor;
Additional information :
WI-172 Cleaning Measure sensor, Measure head mechanical alignment
FAQ 30013
Measurement and results FAQ
High rate of hazy sample rates (FAQ)
Reported result is over 140 mm
Measure head goes down only halfway (FAQ)
Result is send to the LIMS, despite of a leaking pipette
0mm/hr no cells or no plasma
Most results are reported with "Bubbles on top" (FAQ)
Measure sensor position error (FAQ)
Is it possible to export results to Excel ?
What effect have Limit error settings on sending results to LIMS ?
What means L_err (--- 84 75 200) in the result field?