Starrsed FAQ Section
General FAQ section
ESR FAQ
Dilution FAQ
On the printout EDTA value is 001 (FAQ)
Diluter system not sufficiently primed (FAQ)
Air bubbles entering the Diluent system (FAQ)
Diluter is not starting (FAQ)
What can cause Dilution rate errors ? (FAQ)
Aspiration, vacuum and liquid flow FAQ index
Measurement and results FAQ
Cleaning and drying
Carousel moves three position steps (FAQ)
Quality control
Software and hardware FAQ
Reagents
Error lists
Extended Error explanation (Starrsed Software)
Instrument specific FAQ
Knowledge base
Index
|