LoRRca MaxSis User Manual
Copyright Notice
Document history overview
About Mechatronics
Introduction
Instrument description
Safety
Installation
LoRRca MaxSis Program
General operation procedure
Reporting
Trouble shooting
Maintenance
Maintenance schedule
Cleaning
Visual checks
PVP solution routine
Adjusting geometry parameters
Back up the results file
Update the software
Adjustments and replacements
Adjusting projection screen
Adjusting camera for slides
Replace the main fuses
Waste and rinse pump tube replacements
Tubing replacements
Gradient pump tube replacement
Install LORC070901 tubing
Install LORC070902 tubing set 1
Install LORC070903 tubing set 2
Install LORC070904 tubing set 3
After replacement of all tubing
Preparation for long time inactivity
Appendix for LoRRca MaxSis
Drawings LoRRca MaxSis
Log book (Example)
Glossary of Terms
Index
|