Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Install LORC070904 tubing set 3

Note: Start to install with the tube end with label 6 which is shown GREEN in the picture.
Next picture: The installed tube is now BLUE continues with the next GREEN tube.

-

LORC070902_tubing_set_1

LORC070902_tubing_set_1
  • Connect tube with label 6 to the output port of the Rinse pump
  • Connect tube with label 1 to the Input port of the Rinse pump.

LORC070902_tubing_set_1

LORC070902_tubing_set_1
  • Connect tube with label 7 to the output port of the Waste pump.
  • Connect tube with label 4 to the Input port of the Waste pump.

See Also

Tubing replacements

Gradient pump tube replacement

Install LORC070901 tubing

Install LORC070902 tubing set 1

Install LORC070903 tubing set 2

After replacement of all tubing
To top of page Mechatronics home Send Feedback Print