Install LORC070903 tubing set 2
Note : Start to install with the tube end with label 5 which is shown GREEN in the picture. Next picture: The installed blue tube is now BLUE, continue with the next GREEN tube.
-
|
|
- Start with tube end with label 5.
- Put the short tube into the pinch valve V2 in the back port.
- Connect tube with label 5 on the connector 5.
|
- Put the other short tube into the pinch valve V2 at the front port.
- Connect tube with label 6 on the connector 6.
|
|
|
- Take the long end of the tube and run this through the back hole
-
|
- Take now the connection tube and put the short tube in V1 through the back port.
- Connect the tube with label 4 onto connector 4
|
|
|
- Take the long end of the tube and run this through the front hole
|
|
Tubing to waste connector
|
|
- Connect tube with label 7 on the connector 7
|
- Connect tube labeled with waste to the waste bottle
|
|