Note :
Put the waste tubing labeled with 3 and 5 into the first tube bracket
Assure that the tubing is not twisted and the locking ridge is pointing up
Continue the with the four other tube brackets
-
Continue the with the rest of the tube brackets
This how it looks when all the tube brackets are in place.
Tube to needle assembly
Connect tube with label 3 onto connector 3
Tubing replacements
Gradient pump tube replacement
Install LORC070902 tubing set 1
Install LORC070903 tubing set 2
Install LORC070904 tubing set 3
After replacement of all tubing