Adjusting camera for slides
![HWC-cam-cal0333](hwc-cam-cal0333.jpg)
Place the EI 0 slide.
|
|
![slide_EI_0](slide_ei_0.jpg)
- Adjust the camera gain according the value on the slide.
- Close the hood.
- Turn on the led.
|
![](slide_ei_0_result.jpg)
|
Place the EI 0.333 slide.
|
|
![slide_EI_333](slide_ei_333.jpg)
- Adjust the camera gain according the value on the slide.
- Close the hood.
- Turn on the led.
|
![slide_EI_333_result](slide_ei_333_result.jpg)
|
Place the EI 0.6 slide.
|
|
![slide_EI_6](slide_ei_6.jpg)
- Adjust the camera gain according the value on the slide.
- Close the hood.
- Turn on the led.
|
![slide_EI_6_result](slide_ei_6_result.jpg)
|
The pattern must be uniform red. The measured value should match within +/-0.01
|