E5: Duplicated ID !!
Sample rejected. Sample already in carousel.
|
- Wait until sample is measured
- Check general settings (Check for duplicate ID's
|
In General settings screen:
![Settings carousel](setting_screen_gen_duplcate.jpg)
Check for duplicate IDs
- Check for duplicate IDs ON: It is not possible to run the same sample ID as long as this ID is in the pipette carousel data buffer. After empyting the applicable pipette, it is possible to perform a sample with a duplicated ID. The result file will be stored locally with a suffix.
- Check for duplicate IDs OFF: It is possible to run the same sample ID, even when it is still stored in the carousel data buffer. Also this result will be stored locally with a suffix
|