![]() ![]() ![]() ![]() |
||||||
E14E14: Needle motor position error! (home) For Starrsed RS and Interrliner: Outer needle did not reach the home (top) sensor within a certain time limit.
For Starrsed TL: Needle did not reach the home (top) sensor within a certain time limit.
To prohibit E14 it is possible the spindle has to be greased: The spindle of the needle assembly has to be greased on regular base during level 1 maintenance or at least checked during level 1 maintenance. Also the needle holder has to be greased with some Molykote EM-30L or bearing ball grease on regular base.
|
||||||
To top of page |
![]() ![]() ![]() ![]() |
|||||
|