E193

E193: Elevator motor timeout!

The Elevator didn’t reach its position within a certain time limit.

• Fuse was triggered.
• Faulty lift motor (EHST040981).
  

Elevator mechanically blocked.

• Broken wire(s) to lift motor.
• Faulty lift motor driver on Elevator board (Connection motor: 404, Encoder 405).

To check the fuse

1. Check resettable fuses at the back. When the fuse was triggered:
   1. Switch OFF the ESR analyser unit.
   2. Close the Starrsed software.
   3. Check for mechanical obstructions of the elevator/indexer.
   4. Reset the fuse.
   5. Switch ON the ESR analyser unit.
   6. Restart the PC software.
2. When the error occurs again, switch OFF all units and call for service.