Protocols

A protocol is a set of rules governing the communication and the transfer of data between machines, as in a computer system. It is also a formal set of rules and procedures to be followed during a request for information before data is transferred between machines and computer systems.
The following protocols can be selected for data transfer to the Laboratory data processor computer.

1. No Serial output
2. MECHATRONICS-01 bidirectional
3. MECHATRONICS-02 unidirectional
4. Compact bidirectional
5. Compact unidirectional
6. Protocol Sysmex R-3500
7. Protocol Sysmex R-3500 unidirectional

The protocol can be set in menu Settings - Protocol. After selecting a protocol, save the new settings by pressing the [ ENTER ] key.