Protocols

A protocol is a set of rules governing the communication and the transfer of data between machines, as in a computer system. It is also a formal set of rules and procedures to be followed during a request for information before data is transferred between machines and computer systems.
The following protocols can be selected for data transfer to the Laboratory data processor computer.

1. No output
2. MECHATRONICS-01 bidirectional
3. MECHATRONICS-02 unidirectional
4. Sysmex SE 9000
5. Sysmex SE-9000 unidirectional
6. Sysmex R-3500
7. Sysmex R-3500 unidirectional
8. Sysmex R-3500 EPU
9. Compact bidirectional
10. Compact unidirectional (String format for StaRRsed)
11. StaRRsed III (V14)
12. Vesmatic
13. Sedimatic 15
14. Sedimatic 100
15. Opus bidirectional
16. Advia 120 bidirectional
17. Advia 120 unidirectional

The protocol can be set in tab Service - LIMS settings. After selecting a protocol, save the new settings by pressing the Save setting key.