Waste container disposal

Waste container disposal

The waste container has a level sensor and as soon as the level sensor generates a <Waste full> signal, the waste container must be emptied.

Preferably, remove the complete waste container and replace it with a cleaned one, discard waste according the regulations.

Biohazard waste:

Dispose blood tubes into a biohazard sharps container.
Dispose sharps into a biohazard sharps container.
All other bio-hazardous waste is to be deposited into a biohazard bag.
All bio-hazardous waste is deposited into the Medical Waste Management (MWM) bin for pick up.

bio_hazerd_sign

Disclaimer: Check your local environment rules about discharging the waste.

See Also

General operation procedure

Performing Osmoscan

Performing Deformability curve test

Performing Cell stability test

Performing Cell membrane stability test

Performing RBC Aggregation test

Performing Oxygenscan

End of day wash and powering off

Decontamination procedures Routine