Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Waste container disposal

The waste container has a level sensor and as soon as the level sensor generates a <Waste full> signal, the waste container must be emptied.

Preferably, discard the complete waste container and replace it with a cleaned one.

Biohazard waste:

  • Dispose blood tubes into a biohazard sharps container.
  • Dispose sharps into a biohazard sharps container.
  • All other bio-hazardous waste is to be deposited into a biohazard bag.
  • All bio-hazardous waste is deposited into the Medical Waste Management (MWM) bin for pick up.

 

bio_hazerd_sign

Disclaimer: Check your local environment rules about discharging the waste.

See Also

General operation procedure

Powering up

Preparations

Performing Osmoscan

Performing Deformability curve test

Performing Cell stability test

Performing Cell membrane stability test

Performing RBC Aggregation test

End of day wash

Powering down

Decontamination procedures Routine
To top of page Mechatronics home Send Feedback Print