Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
Conveyer motor

Advanced Mixer & coneyer motor To Sample screen Serial output setting AutoCompact settings To Setting screen To Maintenance screen Rack unit setting Timing setting Manual control To Reagents status screen Position motor To History screen Display error history Service screen Timing setting MOVE rack moves a rack in the Input pool to the catch pins CATCH rack moves a rack to the gripper when the gripper is in the IN position RELEASE rack moves a rack from the gribber release position into the END pool

Conveyer motor settings;
Set the Conveyer belt speed at 100%

Test conveyer motor;

MOVE rack moves a rack in the Input pool to the catch pins
CATCH rack moves a rack to the gripper when the gripper is in the IN position
RELEASE rack moves a rack from the grabber release position into the END pool

Switch Conveyer motor is switched OFF or ON for testing the conveyer motor.

In This Section

Explain conveyer motor

Explain conveyer

See Also

Rack unit setting

Mixer motor

Position motor

Timing settings
To top of page Mechatronics home Send Feedback Print