The following settings need to be set;

Mixing settings;

1. Number of turns for long mix.
   • This is the first mix of a new sample rack. The minimum mix value is set default for 8 mixing.
2. Number of turns short mix.
   • After the Mixing interval time a second mix is started, the number of the second mix is set default for 1 mix.

Check both mixing settings with the Test button. Observe the numbers in the numerical field.

Mixing motor settings;

1. Mixing direction:
   • Default setting is left.
2. Mixing speed: default setting 90%
3. Hold level: default setting 30%
4. Homing speed: default 20%

After setting use Save settings to save the new settings. If Save settings is not pressed the old settings will be used