Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
LIMS settings

Load settings, Save settings as and Save settings Press one of the keys to send a test data string to the host computer. In some protocols those selections comes available Select a protocol Set protocol settings Serial output selection Software flow control Stp bit selection Parity selection Data bit selection Baud rate selection Advanced ESR Unit settings Serial output setting Rack unit setting Manual control Display error history To Reagents status screen To Setting screen To Maintence screen Service screen close program To Sample screen To History screen

  • Load settings is used for reloading the stored software settings.
  • Save settings as is used for storing software settings to a file. There are no restrictions for the file name.
  • Save settings is used for storing software settings after settings are changed or altered.

In This Section

Set LIMS communication settings

Set protocol settings

Set protocol settings extra

Send inquiry-Send results

See Also

Service screen

General / Barcode screen

Compact settings

Manual control

Display maintenance history

Display error history

Advanced
To top of page Mechatronics home Send Feedback Print