Explain numerical input

The following numerical inputs can be made:

1. Temperature in Celsius. To set the correct room temperature.
2. ESR sedimentation time in minutes. To the correct sedimentation time: 30 or 60 minutes. This time is reset to default when Service mode is switched OFF.
3. Sample probe depth in millimeters.
4. Pipette wash time (sec) in seconds. Default value 7. This setting is reset to default when Service mode is switched OFF.
5. Pipette dry time (sec) in seconds. Default value 5. This setting is reset to default when Service mode is switched OFF.
6. Mixing interval (30..90 sec) time between two mixing operations of the rack in seconds. Default value 90.

Return to General settings (General settings, General settings, General settings)screen