Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
Needle Control

To Sample screen To History screen To reagent screen To Maintenance screen To General settings screen To Service screen To TLAX Settings To LIMS Settings To ESR Unit Settings To Manual control To Service errors To Advanced To Pump control To Needle&nozzle control To Valves&Actuators control Explain Pump control Save and load settings

Needle control

  1. Outer needle up: The needle assembly is sent to the up position.
  2. Outer needle down: The needle assembly is sent to the down (home) position.

Nozzle control

  1. Fill nozzle up: The Fill nozzle is send to the pipette position
  2. Fill nozzle down: The Fill nozzle is send to the fill nozzle home position.
  3. Rinse nozzle up: The Rinse nozzle is send up to the pipette.
  4. Rinse nozzle down: The Rinse nozzle is send to the rinse nozzle home position.

Nozzle status

  • Status check for the fill- and rinse nozzle is displayed.

See Also

Manual control

Pump control

help_display patient results

Vacuum pump

TLAX service settings

Waste pump

Pump B

Rinse pump

All pumps OFF

Explain needle control

Explain Nozzle control

Valve control

Explain valves and Actuators

Valves

Actuator
To top of page Mechatronics home Send Feedback Print