Sample ID

Sample Identification number

Aspect code

Shows the aspect code (e.g. Hazy <10)

ESR 30 min

The 30 minute method is used. This is the measured 30 minutes value.

ESR 60 min

When the 60 minute method is used, this is the measured 60 minutes value.
When the 30 minutes method is used, this is the calculated 60 minutes value.

ESR 60 min T.Corr

Temperature correction is used. This is the 60 minutes value corrected to 18°C.

Date / time

Date and time of the measurement of the result.

ESR time (min.)

Actual duration of the ESR.

Dilution %

The calculated dilution rate after aspiration of the sample.

Temperature (°C)

Room temperature at the time of the measurement of the sample.

Pipet number

Pipette in which the sample was measured.

Error code

Shows any ESR error or warning code (e.g. "Too many borders found").