Block diagrams over adjusting the fill nozzle

Move the fill nozzle to the pipette home position (See menu selection how to obtain the movement).

For a better grip on the motor place a piece of tubing on the motor axis

pvc_tube_small

To see the correct sequences on the LED 1 and 2 move the fill nozzle motor manual and watch LED 1 comes ON first and then LED 2 comes ON next.

3. Pipette position. The fill nozzle is engaged with the pipette.	4. From pipette to home position. This is the movement from the pipette to the fill nozzle cap.

Detailed Fill nozzle pipette home position	Detailed Fill nozzle to Home position

After the correct adjustment;