Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Reagents

Check the expiry dates of the reagents regularly. Do not use the reagents if expired.

Note: If expired reagent has been used accidentally, the results obtained with these reagents may only be used, when the expiry date was not exceeded more than 30 days.

Diluent is sensitive for bacterial growth. The solution should be discarded if it becomes turbid or infected. When using the small onboard containers, clean the Diluent container thoroughly with 10% Na-hypochlorite. Make sure that the container has been thoroughly rinsed after cleaning.

In This Section

Liquid level sensor not sensing

Reagents alarm

PI QRR010905_915

TDS QRR010931

TDS QRR010933

PI QRR010934

PI QRR010946

PI QRR010947

See Also

Knowledge base

Dilution

Block diagrams ESR Unit

Flushing liquids

Needle Systems

Nozzle assembly

Peristaltic pumps

Quality control troubleshooting

Sampling

Reporting (KB)

Starrsed Software and hardware

Vacuum (KB)

Maintenance

Starrsed RS (KB)

Starrsed ST (KB)

Interrliner (KB)

Starrsed TL (KB)

Starrsed Software screens and explanations

To top of page Mechatronics home Send Feedback Print