Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

TDS QRR010931

REF (datasheet) QRR010931

Starrsed Diluent

 

Supplier

Mechatronics Instruments B.V.
P.O. Box 225
1620 AE Hoorn
The Netherlands
Phone: +31 229 291 129
Fax: +31 229 241 534

Application

Starrsed Diluent is a dedicated IVD product, developed exclusively for the automatic dilution of blood samples in Starrsed ESR analyzers. The product is ready to use, see the instrument manual for instructions.

Instructions For Use

The product is for use on the Starrsed analysers only. The product is ready to use, refer to the Starrsed instrument manual for detailed instructions.

Starrsed ST:

  1. Open the box by tearing off the perforated part on top of the box.
  2. Remove the container screw cap and pull the neck of the bottle pack out of the cardboard box.
  3. Refill the onboard container on the Starrsed instrument according the instructions in the instrument manual.

All other Starrsed instruments:

  1. Remove level sensor and spacer from the empty container in the instrument.
  2. Remove empty container.
  3. Place the new container.
  4. Open the box by tearing off the perforated part on top of the box.
  5. Remove the container screw cap and pull the neck of the bottle pack out of the cardboard box.
  6. Install the level sensor and spacer according the pictures provided in the Starrsed instrument manual .
    Make sure to place the appropriate level sensor in the container by matching the color code on the tube and on the container label.
  7. Select the PRIME function in the Starrsed instrument software to perform the prime.

Chemical/Physical data

The latest version of the Material Safety Data Sheet is available on the website www.rrmechatronics.com

Transport/Storage/Packaging

Transport at 5 - 60 °C (maximum of 14 days)
Store at 5 - 35 °C in dry conditions in well sealed containers
Starrsed Diluent is supplied in 5 Liter containers, LxWxH 19x19x19 cm.

Shelf life

After production: 3 years, but no longer than the expiry date.

After opening the packaging: Maximum of 3 months at advised temperature of 5 till 25°C.

Ecological information

Water hazard class (D) (Self-assessment): Slightly hazardous for water.

Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.

Disposal

Recommendation: Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.

Recommended cleaning agent: Water, if necessary with cleaning agent.

RR Mechatronics Manufacturing B.V.
De Corantijn 13, 1689 AN ZWaag, The Netherlands

See Also

Reagents

Liquid level sensor not sensing

Reagents alarm

PI QRR010905_915

TDS QRR010933

PI QRR010934

PI QRR010946

PI QRR010947

To top of page Mechatronics home Send Feedback Print