Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Maintenance screen

Prime and clean screen Prime all units Prime De-ionised water Prime Disinfectant Prime Diluent Prime Saline Prime / Clean Check sensor Display enter history Display Maintenance history Program is closed via the shut down procedure Prime Rinse solution Maintenance screen To History screen To Service screen To Reagents status screen To Setting screen To Sample screen Wash each pipette Wash only sample pipettes Wash all pipettes Fill and clean Shut down procedure

When there is a sensor alarm, an alarm indicator is shown in the tab Maintenance.

This screen has 5 sub screens:

  1. Prime (Prime / Clean, Prime / Clean) / Clean
  2. Check sensors
  3. Display Error history
  4. Display Maintenance hist.
  5. Maintenance Info

In This Section

Prime / Clean

Check sensors

Display error history

Display maintenance history

Maintenance info

Close

End-of-day-wash schedule settings

End-of-day-wash options

See Also

Interrliner program

Software version

Sample screen

History screen

Reagents screen

General settings

Service screen
To top of page Mechatronics home Send Feedback Print