To set the system date and time, enter the day number and press [ ENTER ]
Then continue in the same way with the month, year, hour and minutes.
[ ENTER ]. Note: When there is no input during 60 seconds the input option is closed.
Menu 5 Settings (Supervisor)
Menu 30 min. method
Menu EDTA mode
Menu Temperature
Menu Tcorr
QC Settings
Menu Carousel position
Menu DST
Menu Result at limit
Menu Printer (results)
Menu Language
Menu ESR time (min)
Menu Protocol
Menu Baudrate
Menu Checksum
Menu ACK/NACK
Menu 30 minute output