This function is used to switch the internal clock to Daylight Saving Time (also called Summertime).
Use the [ ARROW DOWN ] or [ ARROW UP ] keys and select the required option.
Then press [ ENTER ] to save the new setting.
Note: Can only be set between 03:00 and 21:00 and when the carousel is empty.
Menu 5 Settings (Supervisor)
Menu 30 min. method
Menu EDTA mode
Menu Temperature
Menu Tcorr
QC Settings
Menu Carousel position
Menu Result at limit
Menu Printer (results)
Menu Date / Time
Menu Language
Menu ESR time (min)
Menu Protocol
Menu Baudrate
Menu Checksum
Menu ACK/NACK
Menu 30 minute output