Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Cell Membrane stability screen

Settings Main menu Rinse Open ( New Colored diffraction pattern Measurement and sample details Curve display screen Indication of cell shape Measurement results

The next figure shows the window that appears when starting a stability test. See Stability test Settings for details on the Settings parameters that influence the measurement.

The cell membrane stability test consists of 3 stages.

A measurement starts after subsequently clicking <New...(F1)>.

On this screen are shown:

  1. Coloured diffraction pattern.
  2. Curve display screen.
  3. Indication of cell shape.
  4. Measurement and sample details.
  5. Measurement results.

In This Section

Deformability results 1 screen

Cell membrane stability results screen

Deformability results 2 screen

At measurement completion

See Also

LoRRca MaxSis Program

Main screen with Osmoscan

Main screen settings

Hardware check status

Settings screen

Setting screen Osmoscan

Osmoscan screen

Deformability curve determination screen

Stability Curve determination screen

RBC aggregation screen
To top of page Mechatronics home Send Feedback Print