History analyse results

Dilution error
The dilution error detection is a user setting and can be changed in Settings - dilution error detection to 0 ... 25 %. In this example, the dilution error detection is set to 10% and limit errors set to YES.
By selecting Dilution >= 110 all the samples with a dilution rate >= 110 are displayed in the table.
By selecting Dilution <= 90 all the samples with a dilution rate <= 90 are displayed in the table.

Aspect
By selecting one of the three Hazy aspect codes, all the samples with this aspect code are displayed in the table, also in case of an error.

Error
By selecting one of the error codes, all the samples with this error code are displayed in the table.

Warning
By selecting one of the warning codes, all the samples with this warning code are displayed in the table.

In the header of the table the names of the columns are shown. Double-click the header of any column to sort the table by this column in ascending order.