![]() ![]() ![]() ![]() |
||||||
Switch Check tube detection sensor: Use this switch to check the correct adjustment of the optical sensor that checks for the presence of sample tubes in the rack. See “Troubleshooting/ Tube sensor does not detect tubes” for further instructions. Switch Always read barcode: Use this switch to read the barcode at every position in the rack. This tube is correctly logged in the rack, even when the tube sensor is not detecting a tube. If the tube sensor is not detecting a tube and a barcode could also not be read, the tube position is logged as empty. See Service manual for further instructions Return to Position motor screen.
|
||||||
To top of page |
![]() ![]() ![]() ![]() |
|||||
|