Explain results at limit error
-
- set to YES: always transmit results with time errors to the output.
- set to NO: transmit no results to the output when the ESR time is outside the selected range.
- set to YES: always transmit results with dilution errors to the output.
- set to NO: transmit no results to the output when the dilution rate is outside the selected range (set with Diluter settings).
- set to YES: always transmit results with column height errors to the output.
- set to NO: transmit no results to the output when the column height is outside the selected range ("-20"=column height 180mm, "-30=column height 170mm) .
- set to YES: always transmit results with bubbles on top warning to the output.
- set to NO: transmit no results to the output when there is generated a warning for bubbles on top.
- set to YES: always transmit results with hazy aspect to the output as specified in the settings.
- set to NO: three options are possible, Hazy >10, Hazy <25 and Hazy >25, transmit results to the output as specified.
- set to YES: always transmit results with temperature errors to the output.
- set to NO: the settings can be set/changed between a minimum of 15 and maximum of 34 °C.
When an option is set to and this limit error occurs, results will be printed/send to the LIMS.
Return to General settings (General settings, General settings, General settings) screen.
|