Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Warning screen End of day wash

This warning screen appears when the End-of-day wash was not done after the last sample run and the Starrsed ST has been idle or switched off for more than 12 hours. Press [ ENTER ] to start the function. This will ensure that the pipettes are cleaned thoroughly. This function can also be started manually at a later time.

See Also

Quick start-up

Power up sequence

Check list

Printer paper replacement

Liquid levels and reagents preparation

Priming the fluid system

To top of page Mechatronics home Send Feedback Print