Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Liquid levels and reagents preparation

The liquid levels on the Starrsed ST are automatically checked by sensors. To avoid level sensor alarms during routine operation, the liquid levels in the containers should also be checked visually every day.

Loep

NOTE:
Refill reagent as soon as possible when the level sensor alarm appears.
The audio alarm can be disabled with keyboard_icon Service \ Bottle alarm OFF\, stay in this menu option during refilling the bottle(s).

  • Only use the reagent containers which are supplied with the Starrsed ST.
  • To open the bulk reagent packages, remove the perforated flap from the cardboard box, pull the opening out of the box and fit the taps.
  1. Fill up the containers with the reagents.
  2. To remove the containers from the instrument, first pull the slider all the way up, then remove the bottle:

reagent_location

See Also

Quick start-up

Power up sequence

Check list

Printer paper replacement

Warning screen End of day wash

Priming the fluid system
To top of page Mechatronics home Send Feedback Print