Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Result Printout

The results of the ESR measurements are send to the built-in printer and printed on thermal paper.

The layout of the report depends on the selection of the 60- or 30-minute method.

Loep

NOTE:
Thermal paper is sensitive to light and printouts will start to fade after several weeks. If you need to retain the printed reports for future reference, store the printouts in a cool, dark place or make copies on a regular copy machine.

Read_manual_first

NOTE:
The descriptions "Line 1" to "Line D" in the following subsections are only for reference within this documentation. These descriptions do not appear on the printout.
Which lines are actually displayed on the printout depends on the instrument settings and the printed result.

In This Section

Report 60-Minute mode

Report 30 Minute mode

Analyser ERROR

Results at limit errors

Reporting range

Aspect Hazy

See Also

Reporting

Protocols

To top of page Mechatronics home Send Feedback Print