Protocols
A protocol is a set of rules governing the communication and the transfer of data between machines, as in a computer system. It is also a formal set of rules and procedures to be followed during a request for information before data is transferred between machines and computer systems. The following protocols can be selected for data transfer to the LIMS.
- No Serial output
- MECHATRONICS-01 bidirectional
- MECHATRONICS-02 unidirectional
- Compact bidirectional
- Compact unidirectional
- Protocol Sysmex R-3500
- Protocol Sysmex R-3500 unidirectional
The protocol can be set in menu - . After selecting a protocol, save the new settings by pressing the [ ENTER ] key.
|
|
|
|
Serial 2
|
Not selectable
|
Not selectable
|
Not selectable
|
Serial 3
|
Not selectable
|
Selectable
|
Not selectable
|
Serial 4
|
Selectable
|
Not selectable
|
Selectable
|
Serial 5
|
Selectable
|
Selectable
|
Selectable
|
Serial 6
|
Not selectable
|
Not selectable
|
Not selectable
|
Serial 7
|
Not selectable
|
Not selectable
|
Not selectable
|
|