Lorrca Maxsis Program

The Lorrca Maxsis is controlled via an external computer that runs the Lorrca Maxsis program and controlled by mouse pointer.

Note: In the next sections move the mouse over the tab and click the left mouse button. Click again on the same tab for detailed information on the subject.

The following type of measurements can be selected from the main screen:

Default screen is the Main screen
Deformability curve determination screen
Stability Curve determination screen
Cell Membrane stability screen
RBC aggregation screen
Osmoscan screen
Oygenscan screen

In this chapter

Main screen

Main screen settings

Hardware check status (Lorrca status)

Settings screen

Osmoscan screen

Deformability curve determination screen

Oxygenscan screen

Stability Curve determination screen

Cell Membrane stability screen

RBC aggregation screen