Main power connection

The instrument is delivered with an 10A/230V rated Euro plug lead 10A with locking system for IEC inlets. Do not replace with inadequately rated cords. Also delivered is an extension socket.

For a 120V connection an IEC Lock PC 1063 120V US power cord can be delivered.

The pO2scan comes along with an additional power strip to make sure both Lorrca + pO2scan can be powered. The power strip is equipped with a safety switch, enabling the user to power down the entire Lorrca + pO2scan setup in case of calamities. The pO2scan draws power from a standard laptop charging power supply.