Start new measurement

After a measurement has completed and the report is printed (yes/no)

• Press the <Yes> for printed report.
• Press the <No> if no report is required.

Screen Rinse gradient system appears:

1. Open the hood.
2. Press <Rinse>. to remove sample and rinse the system. Sample is lost and no longer available.
   Screen Empty cup appears.
   
   
3. Press <Clean
4. After a measurement on whole blood use the automated rinse cycle and simultaneous rinse the funnel with a spray bottle with de-ionized water to clean and empty the CUP.
   
   
5. Press <F1> or click on New...F1 to perform another measurement.
   or
   Press <main menu> to perform other tests (perform in that case also an “End of day wash”).
   or
   Exit the software and perform an “End of day wash”.