Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Turn off

It is recommended to turn the Interrliner off at the end of the day. Before the instrument is turned off, it is good practice to carry out the Daily maintenance or at least the End-of-day wash procedure. This will help to keep the instrument clean and almost free of bacterial growth for a period of days.

Biohazard

Always be aware of the dangers of infection, especially during maintenance. Take the appropriate precautions.

Note: The Interrliner may remain switched ON continuously. However, the customer should consider environmental issues such as energy consumption when the instrument is not to be used for some time. It is also recommended to completely restart the instrument and (if applicable) Windows once in a while to clear the memory and ensure a stable operating system.

In This Section

End-of-day-wash procedure

Turn off sequence

See Also

Operation

Quick start-up

Fill procedure

Checks during operation

To top of page Mechatronics home Send Feedback Print