Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Waste container

  1. Unscrew the cap:
    BANG_waste_cap
  2. Lift the slider and take the waste container out of the compartment:
    BANG_waste_remove
  3. Close the container with the provided cap.
  4. Install the empty container in the reversed order.
  5. Only for instruments with waste sensor BANG019015 : In case of a new waste bottle: Check the values of the waste sensor at Menu "Set waste sensor".

bio_hazerd_sign

Warning:
The waste must be treated as potentially infectious (biohazardous) material.

Loep

NOTE:
If you are re-cycling the waste container, make sure that it is bleached and rinsed thoroughly. Use only a waste container supplied by Mechatronics.

See Also

Waste disposal
To top of page Mechatronics home Send Feedback Print