Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Chip card type A to E

Chip cards of the types A to E are used to operate the instrument in a pay-per-test scheme. The chip cards contain a certain amount of credits units. How many tests can be performed with this amount of credits depends on the configuration which is made by the local Starrsed ST dealer. The following amounts of credit units are available:

Card type

Credit units

A

100.000

B

500.000

C

1.000.000

D

5.000.000

E

10.000.000

Loep

NOTE:
Available card types and amount of credit units per card may be subject to changes.

The total amount of credit units on the chip card is transferred to the Starrsed ST at once and the chip card is then rendered void. It is not possible to use the same chip card to transfer credits to more than one instrument.

This type of card is dealer dependent. The instrument only accepts chip cards of the dealer to which the instrument is configured.

See Also

Chip card system

Chip card type Q

Chip card type S

Chip card type T

To top of page Mechatronics home Send Feedback Print