Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Osmoscan curve

The Osmoscan window appears by clicking the <Osmoscan>-button from the introduction window. A measurement starts after clicking "New…(F1)". The figure shows the window that appears before starting a scan. See "Settings" for details on the Settings parameters that influence the measurement.

A measurement starts after subsequently clicking <New...(F1)>.

On this screen are shown:

  1. Coloured diffraction pattern.
  2. Curve display screen.
  3. Indication of cell shape.
  4. Measurement and sample details.
  5. Measurement results.
  6. Parameters

Colored diffraction pattern Measurement and sample details Curve display screen Indication of cell shape Measurement results Parameters Close program

See Also

Osmoscan screen

Osmoscan result screen
To top of page Mechatronics home Send Feedback Print