Start new measurement
After a measurement has completed and the report is printed (yes/no)
- Press the <> for printed report.
- Press the <> if no report is required.
Screen appears:
- Open the hood.
- Press <>. to remove sample and rinse the system. Sample is lost and no longer available.
Screen appears.
- Press <
- After a measurement on whole blood use the automated rinse cycle and simultaneous rinse the funnel with a spray bottle with de-ionized water to clean and empty the CUP.
- Press <F1> or click on to perform another measurement.
or Press <> to perform other tests (perform in that case also an “”). or Exit the software and perform an “”.
|