Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Pump connection tubing

Pumps to Needle assembly (LORC070904)

Note: Start to install with the tube end with label 6 which is shown GREEN in the picture.
Next picture: The installed tube is now BLUE continues with the next GREEN tube.

-

LORC070902_tubing_set_1

LORC070902_tubing_set_1
  • Connect tube with label 6 to the output port of the Rinse pump
  • Connect tube with label 1 to the Input port of the Rinse pump.

LORC070902_tubing_set_1

LORC070902_tubing_set_1
  • Connect tube with label 7 to the output port of the Waste pump.
  • Connect tube with label 4 to the Input port of the Waste pump.

Tube to needle assembly (LORC070901)

  • Connect tube with label 5 onto connector 5

LORC070902_tubing_set_1
  • Connect tube with label 3 onto connector 3

LORC070902_tubing_set_1
  • Connect tube with label 2 onto connector 2

LORC070902_tubing_set_1

See Also

Waste and rinse pump tube replacements

Rinse and waste pump tube replacement
To top of page Mechatronics home Send Feedback Print