Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Display patient results

To Sample screen To History screen To reagent screen To Maintenance screen To General settings screen To Service screen To Display pipette data To Display sample history To Rack history Back to sample history list To History analyse To ESR statistics To QC Statistics= To History sample date and time options title= Print result header, to activate in general settings To print results To send all results to LIMS To send selected result to LIMS

In the window Select date to show results: double click on the file name to select the results of the selected date.
Press Refresh to refresh the list of available files.
In the window Sample ID, type the sample ID information and press Search.

Press Options for the following search options:

  • Show today's results.
  • Show today's results from a selected time frame of the day.
  • Show results of a number of past days. Default value is set for 7 days.
  • Show results of a specific day.
  • Show results of the range between the first selected date to the next selected date.

From the selected Sample ID detailed information is shown on this screen.

Sample ID

Sample Identification number

Aspect code

Shows the aspect code (e.g. Hazy <10)

ESR 30 min

The 30 minute method is used. This is the measured 30 minutes value.

ESR 60 min

When the 60 minute method is used, this is the measured 60 minutes value.
When the 30 minutes method is used, this is the calculated 60 minutes value.

ESR 60 min T.Corr

Temperature correction is used. This is the 60 minutes value corrected to 18°C.

Date / time

Date and time of the measurement of the result.

ESR time (min.)

Actual duration of the ESR.

Dilution %

The calculated dilution rate after aspiration of the sample.

Temperature (°C)

Room temperature at the time of the measurement of the sample.

Pipet number

Pipette in which the sample was measured.

Error code

Shows any ESR error or warning code (e.g. "Too many borders found").

A complete overview of measurement data is shown with activating the option "Display raw data".

See Also

Display Sample history
To top of page Mechatronics home Send Feedback Print