PC Operation and User Interface

The entire operation of the Interrliner is driven by a personal computer with Windows operating system. The user interface is intuitive and can be activated via the keyboard or the optional touch screen. All the data from each sample, including the raw measuring data and a pictorial representation of the pipette, is stored and may be retrieved later if needed.

The Main screen shows which pipettes are in use. The section in the middle of the layout gives the sample number and status for each pipette including "time to go" before the result is due.

A pictorial representation of the pipette at the measuring position and a graph of the optical density over the length of the entire pipette is shown on the side. This data is retained in memory for subsequent retrieval if required.