Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Cleaning Touch screen display

Any standard glass cleaner can be used to clean the touchscreen, but avoid products containing ammonia or high concentrates (>70%) of alcohol or solvents.

Always spray the glass cleaner on a microfiber cloth or towel and then clean the touchscreen. Glass cleaner sprayed directly on the monitor could possibly leak inside a non-sealed unit and cause damage.

Dirt and fingerprints do not affect the operation of a properly sealed touch display.

See Also

General Maintenance

Daily

Weekly

Level 4 maintenance

Level 3 maintenance

Check or replace sample probe or outer needle

Reagents installation

To top of page Mechatronics home Send Feedback Print